Paper Writing Services QC engineer. The camera takes pictures of the units in process, and the computer compares them to the picture of a good

Abstract
of the new QC system, including the salaries of the QC engineers, have been included as factory overhead in calculating the company’s plant-wide manufacturing-overhead rate, wch is based on direct-labor dollars. The company’s president is confused. s vice president of production has told m how efficient the new system is. Yet there is a large increase in the

Must use all attached document, 3 supported readings(referances) and other ghlighted parts Borealis Manufacturing has just completed a major change in its quality control (QC) process. Previously, products had been reviewed by QC inspectors at the end of each major process, and the company’s 10 QC inspectors were charged to the operation or job as direct labor. In an effort to improve efficiency and quality, a computerized video QC system was purchased for $250,000. The system consists of a minicomputer, fifteen video cameras, and other peripheral hardware and software. The new system uses cameras stationed by QC engineers at key points in the production process. Each time an operation changes or there is a new operation, the cameras are moved, and a new master picture is loaded into the computer by a QC engineer. The camera takes pictures of the units in process, and the computer compares them to the picture of a good unit. Any differences are sent to a QC engineer, who removes the bad units and discusses the flaws with the production supervisors. The new system has replaced the 10 QC inspectors with two QC engineers. The operating costs of the new QC system, including the salaries of the QC engineers, have been included as factory overhead in calculating the company’s plant-wide manufacturing-overhead rate, wch is based on direct-labor dollars. The company’s president is confused. s vice president of production has told m how efficient the new system is. Yet there is a large increase in the overhead rate. The computation of the rate before and after automation is as follows: Budgeted Manufacturing Overhead 1,900,000 2,100,000 Budgeted Direct Labor Cost 1,000,000 700,000 Budgeted Overhead Rate 190% 300% Three hundred percent, lamented the president. How can we compete with such a gh overhead rate Using the module readings and the Argosy University online library resources, research manufacturing overhead. Review the situation. Complete the following: Write a 3 4-pages paper in Word format. Apply APA standards to citation of sources. Use the following file naming convention: LastnameFirstInitial_M2_A2.doc.

Sample references
  • (‘Kirllenko, A. and R. Sedjo. 2007. Climate change impacts on forestry. Proceedings of the National Academy of Sciences of the United States of America 104(50):19697-19702.’,)
  • (‘Jacob, D. J., and D. A. Winner. 2009. Effect of climate change on air quality. Atmospheric Environment 43(1):51-63.’,)
  • (‘Weick, KE & Sutcliffe, KM. 2011. Managing the unexpected: Resilient performance in an age of uncertainty. New York: John Wiley & Sons ‘,)
  • (‘3M. (2015). All Patient DRG Definitions Manual. Version 32. Retrieved fromhttp://solutions.3m.com/wps/portal/3M/en_US/Health-InformationSystems/HIS/Products-and-Services/Products-List-A-Z/APR-DRG-Software/’,)

Need your ASSIGNMENT done? Use our paper writing service to score better and meet your deadline.


Click Here to Make an Order Click Here to Hire a Writer