Paper Writing Services into your discussion). – develop detailed recommendations to reflect a gher priority and accountability to Organizational Health and Safety. First, overall Organizational

Collect and analyze information needed to understand the production process and the hazards involved in each stage of the cotton dying process (chemicals, macnery, equipment, health effects, processes, controls, legislation, standards, guidelines, SDS, studies, statistics, reports, etc.). These are the stages (You ONLY have to research #5. #6, #7, IGNORE THE FIRST 4): Utilize the following Research Links: https://bb-gbc.blackboard.com/bbcswebdav/pid-5402952-dt-content-rid-72055048_1/xid-72055048_1 https://bb-gbc.blackboard.com/bbcswebdav/pid-5402952-dt-content-rid-72055047_1/xid-72055047_1 – Also, include at least one article reference from the Occupational Health and Safety Canada Magazine.  SDS’s can be located through the CCOHS Academic Support Program link accessed via –  problem-solve and synthesize your information to discuss the hazards involved in each stage of the production process. Apply relevant research on the hazards and health effects to the workers. (Remember ts is a research paper and extensive research needs to be integrated into your discussion). – develop detailed recommendations to reflect a gher priority and accountability to Organizational Health and Safety. First, overall Organizational Initiatives should be discussed in detail such as policies and programs, JHSC’s etc. Then, for each hazard identified in the process, recommendations should be described in detail and prioritized according to ‘The Principles of Control’ (At the Source, Along the Path, and At the Worker level).  Relevant research and legislation should be incorporated in your discussion to support your recommendations. Note, ts research paper should be completed in essay format (no point form). You are not merely repeating information from the case, but instead are conducting a significant amount of research to understand the processes involved and to address the requirements. Any diagrams, charts, SDS’s etc. should be included in an Appendix after discussing in the essay. References for research must be properly cited using the APA or MLA method of documentation. References to legislation in the Pocket Ontario OHS Act & Regulations need to include section, sub-section, clause etc. and you need to state whether you are referring to the OHS Act, or state the name of the particular Regulation that you are referencing, for example, WHMIS Regulation, Regulation for Industrial Establishments etc. Legislation should not be merely listed – it needs to be properly applied to your recommendations. See examples below. Examples: a) The employer needs to develop an occupational health and safety policy and program, as is required under Section 25(2)(j) of the OHS Act. Ts includes detailed information on..….. wch relates to ts case. b) Ts workplace has 500 employees and therefore requires a JHSC of a minimum of 4 people, as discussed in Section 9(6) of the OHS Act.   We would even recommend further that the committee…… c) As it states in The Noise Regulation, Section 2(4), employers must ensure that employees are not exposed to a noise level greater than 85 db. In order to control for noise at the source, it is  recommended that …….. d) Workers are required to wear appropriate eye protection according to the Regulation for Industrial Establishments Section 81. The specific type needed for ts operation is ……..